卤氧化铋光催化剂改性的研究进展及应用

随着全球环境问题与能源问题的不断加剧,人们迫切需要开发一些高效、环保、稳定的光催化剂。卤氧化铋(BiOX,X=Cl、Br、I)因其独特的层状结构,优异的光学、电学性能,在光催化领域受到了越来越多的关注。虽然BiOX光催化剂在光催化反应中展现出了优异性能,但其光催化效率仍有待提高。简要叙述了BiOX的结构与性能以及当前主流的制备方法,主要概述了最近几年卤氧化铋光催化剂改性的研究进展。改性方法主要有微结构调控、晶面与缺陷调控、掺杂、构造异质结等,这些方法主要是通过提高卤氧化铋或卤氧化铋复合物的光吸收能力、光生载流子的分离和运输效率、以及活性位点的暴露量来实现改性。介绍了其在环境、能源和生物等领域的应用,同时对BiOX的发展提出了问题和展望。     

弹射起飞和拦阻着陆冲击试验方法探讨

目的研究舰载机机载装备弹射起飞和拦阻着陆冲击试验的工程实现方法。方法从GJB 150.18A—2009、MIL-STD-810F/G及其提供的实测数据出发,分析弹射起飞和拦阻着陆冲击载荷特征,对几种常用试验方法的工程实现进行探讨和比较。结果弹射起飞和拦阻着陆冲击具有瞬态、交变、低频、大位移、高速度等特征。阻尼正弦波方法的实施路径比较明确,复杂波形再现方法实施路径比较模糊且复杂,超长脉冲半正弦波方法具有多种局限性,前两种方法的速度、位移都较大。结论阻尼正弦波方法较复杂波形再现方法更容易实现,但两者都需要大位移、高速度的专用冲击试验设备和适当的波形处理技术,超长脉冲半正弦波方法在前面两种标准推荐方法能够实现时,不建议使用。     

基于能值理论的农田—畜禽生产系统可持续动态

为了解我国东南丘陵山区农业生产动态及其可持续性,以福建典型山区德化县为例,构建废弃物能值比例、环境污染能值负产出等指标,运用能值理论定量分析德化县2007—2016年农田—畜禽生产系统投入产出、环境负荷及可持续性的变化。结果表明：德化县农田—畜禽生产系统能值投入以购买能值为主,占能值总投入的68%~79%,水资源能值约占21%~31%;畜禽子系统能值产出占72%以上;能值密度在2.68×10¹²~3.33×10¹² sej·m^-2之间波动上升,净能值产出率下降40%,环境负荷明显加重,2015年以来有所减轻;可持续发展指数在2007—2010年短暂上升后快速下降,由1.14降至0.42。从构建的指标来看,系统废弃物能值比例有所下降,环境污染能值产出减少约22%,综合经济效益和废弃物利用情况,近年来可持续发展状况逐渐好转。德化县目前正处于农田—畜禽系统产出结构调整期,应增加系统内部反馈能值用量,控制化肥、饲料投入,提高废弃物利用率,以实现可持续发展。     

油脂对红壤结构性质与水流运动特征的影响

本文通过室内灌水入渗试验,研究了灌溉水油脂浓度（0,1.0,3.0和10.0g/L）、灌水频率（1d1次,2d1次,4d1次）和灌溉模式（纯清水灌溉,纯含油脂灌溉水灌溉,含油脂灌溉水-清水交替灌溉）对受灌土壤结构性质与水流运动特征的影响.结果显示,随灌水进入到受灌土壤中的油脂主要集中在优先流通道中快速运动,优先流湿润锋处的土壤油脂浓度较高且不受灌溉水中油脂浓度的影响,表明即便是采用较低油脂浓度的灌溉水灌溉,依然对地下水系统存在较高的污染风险;高频率、低定额的含油脂灌溉水灌溉有利于进入到受灌土壤中的油脂向深层土壤运动,使得斥水性土层厚度增大,从而导致入渗水流运动的不确定性及地下水系统的污染风险均增大;油脂对受灌土壤团聚体的再团聚作用只有在其浓度较高时才能形成,含油脂灌溉水-清水交替灌溉因降低了受灌土壤的油脂浓度反而导致土壤团聚体分散和破碎.研究成果对再生水和原污水农田灌溉制度设计具有参考价值.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

海水中阴极极化对X80钢应力腐蚀及氢脆敏感性的影响

目的研究不同p H值海水中阴极极化对X80管线钢应力腐蚀及氢脆的抑制作用。方法采用慢应变速率拉伸试验、电化学测试、微观组织观察等分析方法。结果 X80钢在天然海水中的析氢电位约为-940m V(vs.SCE,下同),海水p H为3.5时析氢电位发生正移。其应力腐蚀敏感性与极化电位有很大关系,随着极化电位负移,X80钢的氢脆敏感性增加。天然海水中当极化电位负于-950 m V时,断口出现准解理断裂特征形貌。在-1050 m V极化电位下,钢材进入氢脆断裂区发生脆性断裂。海水p H为3.5时,-900 m V钢材有发生氢脆的危险。结论与天然海水相比,X80钢在p H为3.5的酸性海水中具有较高的应力腐蚀敏感性,两种海水介质中X80钢的应力腐蚀敏感性均随极化电位负移而增加。